Mirch Bead King Hydrophobic Spray Coating (3 Sizes Available)

Shop now for Mirch Bead King Hydrophobic Spray Coating. Oz General Store - Australia's online store!

Sizes: 500ml, 1L, 5L

MOVE OVER, THE KING IS HERE.

MIRCH BEAD KING is the ultimate water-based spray coating. After years of R&D we developed the perfect blend with some of the finest ingredients available to create an exceptional balance between beading, sheeting, gloss and slickness.

AS ALWAYS, EXCELLENCE FORMULATED.

When we developed BEAD KING we ran countless comparisons against other products in the market to determine the efficacy of our formula. BEAD KING demonstrates unbelievable hydrophobicity and incredible chemical resistance. This creates a powerful protective layer on the surface to prevent damage from environmental contaminants and UV rays.

SAY GOODBYE TO DULL PAINT.

Given BEAD KING'S slickness and hydrophobicity it makes maintenance of your vehicle much easier, whilst also keeping your vehicle looking amazing for longer. Dirt, grime and environmental contaminants struggle to cling to a the painted surface that has been treated with BEAD KING. In fact, the surface becomes so hydrophobic that it is even possible to dry the surface with water, it truly is incredible.

A well cared for coating will last up to 6 months. Spray coating bonds almost instantly, however best effect is achieved after allowing to cure for 24 hours. A second coat should be applied to further boost effectiveness and durability. Second coat should be applied once initial coat has cured for at least 1 hour. Can be applied bi-monthly to maintain peak performance.

Please note: Appearance of labels, triggers, liquid appearance and colour may all vary from what is delivered. This is no way affects the performance of the product.

STORAGE INSTRUCTIONS.
When not in use, ensure sprayer nozzle has been returned to closed position to prevent evaporation and leakage of product. Store product upright in a cool dry place, out of direct sunlight.

How to use:

Note: Do not use in direct sunlight. Do not allow to dry on surface. Always spot test when unsure.

1. Vehicle should be thoroughly washed, correctly decontaminated, and then dried prior to using MIRCH BEAD KING. Application process should occur in an area where your vehicle will be protected from the elements (i.e. Rain, wind, etc).
2. Preferably use a new towel/applicator for each side of your car so it does not become clogged with the product. Approximately 5 would be ideal - 2 sides, rear, front, roof.
3. Work a section at a time, mist spraying product 3-6 times evenly on to dry, clean and cool panel. Using too much product will significantly impair the properties of the coating.
4. Prime your quality towel/applicator, like MIRCH LUX or BLOQ, by spraying a further 4-6 sprays into it and massage product into panel with side to side and up and down cross-hatch motions to spread BEAD KING evenly over the area.
5. Once the section has been sufficiently covered, buff remaining residue out to achieve a high gloss and protected finish.
6. Allow MIRCH BEAD KING to cure out of the elements for at least an hour - the longer the better. Best results will be visibly evident after 24 hours has passed since application.
7. A second coat can be applied after at least 1 hour has passed and is recommended for optimal performance and durability!