Mirch Dragon Blood Iron Reactive Wheel Cleaner V2.0 (3 Sizes Available)

Shop now for Mirch Antibac Interior Surface Disinfectant. Oz General Store - Australia's online store!

Sizes: 500ml, 1L, 5L

MIRCH DRAGON BLOOD unites mighty degreasing power with a reactive iron purifier to vanquish grime, dirt and brake dust from your wheels. As DRAGON BLOOD suffuses the surface, it swiftly changes colour on contact with iron particles, transforming into a vivid purple. The solution continues to cling to the surface as it loosens and dissolves the impurities, making them effortless to wash away. 

DRAGON BLOOD is pH neutral and does not rely on caustic or acidic properties, making it safe on most wheel types, whether they are coated or not. You'll be amazed by the awesome cleaning power and its ability to pull iron contaminants that have been stuck for years. 

DRAGON BLOOD is an iron reactive wheel cleaner. This means it is most effective at cleaning built-up brake dust and iron contaminants from external sources. The break dust and iron deposits become liquid after about 1 - 2 minutes of contact time, this can easily be rinsed with a pressure washer. If your wheels are also covered with other grime, grease, oil etc. Then light agitation with a quality brush or mitt will be required.  

*Dragon Blood is safe on most wheel types, however we always suggest doing a small test patch when trying on a new wheel surface. While these products have been extensively tested in a variety of different scenarios there are a multitude of wheel finishes used in the aftermarket and OEM*

Like all iron-reactive cleaners, Dragon Blood does have a strong odour and should be used in a well ventilated area or if sensitive use a face mask - do not inhale vapour. The colour of liquid varies from almost colourless light pink/ purple to yellow - it can be both clear or milky.

STORAGE INSTRUCTIONS.
When not in use, ensure sprayer nozzle has been returned to closed position to prevent evaporation and leakage of product. Store product upright in a cool dry place, out of direct sunlight.  

*Settling can occur in Dragon Blood liquid while stored in bottle, always give a quick shake before use.*

Note: Shake well before use. Do not use in direct sunlight. Do not allow to dry on surface. Apply in a well-ventilated area and wear gloves. Always spot test when unsure.

1. Mist spray MIRCH DRAGON BLOOD generously on to a dry and cool wheel to coat entire surface. 
2. Allow to dwell for 1-3 minutes but do not allow to dry. DRAGON BLOOD will react and change colour to a vibrant purple after contact with iron particles. 
3. Agitate wheel with detailing brushes or quality mitt to further loosen tough impurities (if necessary).
4. Pressure wash entire wheel, ensuring you wash away all residue and hit all hidden corners, especially those down low to completely clean surfaces.

Please note: The images shown are for illustrative purposes only. Products and their specifications may be subject to change without prior notice.