Mirch Grime Off Heavy Duty Wheel Cleaner (Acid-Free) V2.0 (3 Sizes Available)

Shop now for Mirch Grime Off Heavy Duty Wheel Cleaner (Acid-Free). Oz General Store - Australia's online store!

Sizes: 500ml, 1L - Refill, 5L - Refill

Attention: Only the 500ml includes the spray nozzle!

Brake dust and road filth is not just ugly, it will destroy your wheels if left unchecked. MIRCH GRIME OFF dissolves road grime and embedded contaminants such as brake dust. GRIME OFF uses gravity-defying technology allowing the product to cling to the contaminated surface and loosen the heavily embedded contaminants. 

The Safest Way to Get the Deepest Clean.

Many other powerful wheel and tyre cleaners on the market use nasty acids that can seriously damage wheels and even remove paint which completely destroys the surface. This becomes even more apparent after repeated use. GRIME OFF has extreme deep cleaning power without the use of acids and is safe to use on most wheel types. It can also be used to degrease other troublesome areas of the vehicle like the engine bay. 

*WHEEL TYPES*: It's important to only use GRIME OFF on car wheels in good condition and that are not bare metal eg. bare or polished aluminium.

If you have a particularly delicate wheel surface or you're unsure about the suitability on your wheels, always spot test and start at a weaker dilution.

DO NOT let product dry on wheels or use in direct sunlight. Powder coated/ anodised wheels and parts are not suitable with these type of cleaning agents. You cannot use Grime Off on carbon ceramic brakes. Not for use on painted surfaces that are not OEM clear coated.

Please note: Appearance of labels, triggers, liquid appearance and colour may all vary from what is delivered. This is no way affects the performance of the product. All alkaline products including Grime Off ship with electrical tape around the cap as an additional layer to prevent leaking.

STORAGE INSTRUCTIONS.
When not in use, ensure sprayer nozzle has been returned to closed position to prevent evaporation and leakage of product. Store product upright in a cool dry place, out of direct sunlight.  

Note: Not for use on raw/unfinished metal or damaged surfaces. Do not use in direct sunlight. Do not allow to dry on the surface. Always spot test when unsure. Apply in a well-ventilated area and wear gloves.

1. Mist spray MIRCH GRIME OFF generously on to cool and dry wheel and allow to dwell for between 1-4 minutes but do not allow to dry. Solution will cling to surface and start pulling at impurities immediately.
2. For heavily soiled surfaces, agitation may be required. Use a brush, like MIRCH DETAILING BRUSHES | WHEEL WOOLIES| WHEEL BRUSH to loosen impurities in particularly hard to reach areas like spoke joints and wheel nut holes.
3. High pressure rinse from bottom to top, hitting the wheel from different angles to make sure not to miss the lower joins that aren’t easily visible.

Recommended Dilution Starting Points:

• 1:1 – Heavy cleaning
• 5:1 – General cleaning
• 10:1 - Light duties

Please note: The images shown are for illustrative purposes only. Products and their specifications may be subject to change without prior notice.