CLEARANCE Penrite P26 DPF Cleaner 400ml

P26 DPF Cleaner Aerosol is an easy-to-use, professional strength, workshop grade Diesel Particulate Filter (DPF) cleaner which effectively cleans and loosens carbon and ash deposits in a DPF. Its foaming formulation deeply penetrates into the pores of the honeycomb structure of a DPF.

APPLICATION

P26 DPF Cleaner Aerosol is designed for use in all diesel engine vehicles fitted with a DPF in passenger cars, 4WDs, light and heavy duty commercial vehicles.

P26 DPF Cleaner Aerosol is used to easily regenerate clogged or heavily soot contaminated DPFs and can be used as a solution or preventative measure.

INSTRUCTIONS FOR USE

• Let the engine and DPF cool down before using P26 DPF Cleaner Aerosol, the ideal temperature is between 10^oC – 40^oC
• Remove the pressure sensor from the particulate filter or disconnect the particulate filter at the engine side
• Shake can thoroughly
• Insert the tube of the aerosol in the opening with the spraying direction towards the filter. Spray the contents 3 to 5 times, with intervals of 5 minutes
• Let the product soak for a minimum of 30mins
• Reassemble the temperature, pressure sensor or the particulate filter
• Start the engine, dirty water (contaminated with soot and ash) will drip out of the exhaust pipe. Let the engine idle until the dripping stops. If necessary, dry the vacuum tube with compressed air
• Perform a manual regeneration cycle with a diagnostic tool or start a regeneration by test driving for 20-30 minutes at higher speeds (100km/h) and RPM
• If necessary, clear error messages