Home » Penrite PGXL Coolant Premix 20L

Penrite PGXL Coolant Premix 20L

Out of stock
SKU: PGXLPMX020
$254.00 inc. GST

20L - CUSTOM DELIVERY QUOTED REQUIRED

PGXL Coolant Premix is a blue coloured, heavy duty propylene glycol based, low silicate, phosphate and amine free hybrid engine coolant.

APPLICATION

PGXL Coolant Premix is designed for use where propylene glycol coolants are specified in passenger car, light & heavy commercial vehicles. It is formulated to provide excellent high temperature protection as well as long term corrosion protection for aluminium, cast iron, brass, copper, steel and solder. It is especially formulated for heavy vehicle application and the protection of heavy diesel wet sleeve liners.

PGXL Coolant Premix is premixed and does not require any further dilution. For initial fills, it requires no supplemental cooling additives. PGXL Coolant has a lower toxicity than either Ethylene glycols but can be used to top up systems containing both OAT and conventional type coolants. We recommend that if a complete fill is required that the system be flushed prior to the introduction of the new coolant. It can be used in on road truck, off road mining, farm & marine applications.

PGXL Coolant Premix can be used in on road truck, off road mining, farm & marine applications and is suitable for the following -

Caterillar Cummins Detroit Diesel Ford Heavy Truck
GM Heavy Truck Kenworth Land Rover Mack Trucks
MAN MTU New Holland PACCAR
Peterbuilt Perkins SAAB Scania
Toyota US Federal Volvo Heavy Truck White Star
and many others

PGXL Coolant Premix will last 12,000 Hours or 1,000,000 km's or whichever comes first.

COOLANT TESTING

Penrite recommend flushing the cooling system prior to a complete service refill. Penrite Radiator Flush effectively cleans the system in 7 minutes and prepares the cooling system for new coolant.

DOSE RATE - FREEZING POINT BOILING POINT
Mix Ratio 50%
Freezing Point -31°C
Boiling Point +103°C

 

  • Provides long life protection for all metals
  • Provides anti freeze anti boil protection
  • Excellent protection for aluminium & heavy diesel wet sleeve liners
  • Note: Premix coolants do not require further dilution with demineralized water
  • Low toxicity compared to Mono Ethylene Glycol based coolants
  • Contains nitrite and molybdate for cylinder liner protection.
  • Compatible with both OAT and conventional coolants
  • Premixed at 50/50 ratio so no mixing required
  • Requires no dosing with supplemental cooling additive
PRODUCT PERFORMANCE LEVELS
  • ASTM D-6211
  • ASTM D-6257
  • TMC RP 330